Description
Clean up your Fiesta’s interior. This set of four Seat Bolt Covers is a finishing trim piece that hides the bare, sometimes rusty steel brackets and bolts at the front of your seat rails. They keep dirt and dust from collecting in the pockets around the bolts, so the area looks finished and wipes clean.
WHY YOU’LL WANT THEM
From the factory, the bolts that hold your front seat rails to the floor sit exposed in stamped-steel brackets. Over time that bare steel can start to rust, and dirt, dust, crumbs and grit collect around the bolt heads and are difficult to clean out. These covers snap over the bracket and give you one smooth, flat trim surface instead, hiding the rust, bare metal and buildup.
FEATURES
– Hides rust, bare metal and the bolt head for a clean, trimmed look
– Keeps dirt and dust out: fills the pocket so nothing can pack in around the bolt
– Textured black finish that blends with your interior trim
– Snaps firmly into place: a ring grips the bolt head and a pin locates in the Torx socket
– No adhesive, no tools, no drilling, and the seat bolts stay installed
– All four covers are identical, so there’s no left or right
FITMENT
– Ford Fiesta, all trims including ST, 2013-2019
– Covers the front seat bolts, two per front seat
– Not sure yours matches? Message me a photo of your seat bracket before ordering
WHAT’S INCLUDED
– 4 Seat Bolt Covers (two for each front seat)
INSTALLATION
1. Vacuum and wipe the bracket area so it’s clean and dry.
2. Line the ring up with the bolt head, with the thin flat end facing the seat rail.
3. Press down firmly until the cover snaps into place and sits flat on the bracket.
4. Repeat for the other three, then slide each seat through its full travel to confirm nothing rubs.
MATERIAL AND SIZE
Printed in the USA in PETG, a durable material suited to car interior temperatures.
GUARANTEE
Every Razzter part is guaranteed 100% against mechanical failure or deformation. If it fails, I’ll replace it.
Reviews
There are no reviews yet.